黄土洞室掘进深度与围岩位移变化规律研究     

时卫民  王鹏  赵尚毅 《岩土工程技术》2020,(2):70-75

应用PLAXIS 2D/3D有限元分析软件,对某黄土洞室进行了二维、三维分步掘进、三维一次掘进等工况的弹塑性有限元分析,研究分析了不同工况下洞室围岩位移的变化规律,并对掌子面的空间效应进行了分析。分析结果表明,二维与三维分步计算的最终位移基本一致,可以用二维的计算结果来估算洞室开挖的最终位移。三维分步掘进的分析表明,不同埋深的洞室其位移比的变化规律基本一致,当L/B<1时(L为掘进深度,B为洞室跨度),位移比呈线性增加;当L/B>1时,位移比呈非线性增加;当L/B>3时,其最大位移接近最终位移。掌子面的空间效应分析表明,在掌子面处的位移约为最终位移的1/3,距掌子面0.5倍跨度处的位移约为最终位移的2/3,距掌子面2.5倍跨度处的位移基本达到了最终位移。  相似文献   

岩石膨胀性试验注意事项探讨     

刘军  谷莉  郭程  卓慧英 《岩土工程技术》2020,(2):117-121

从室内试验的角度来探讨几类工程勘察中岩石常用膨胀性试验(自由膨胀率、膨胀力、侧向约束膨胀率、耐崩解)的注意事项,从野外取样、标准样品制取、试验操作、方法选择等方面进行了论述,力求减小试验误差,提高膨胀岩的试验水平,保证试验结果的准确性,并使膨胀岩膨胀性指标的测定方法更臻完善。  相似文献   

Application of Markovian models for non-ergodic and non-stationary earthquake times series for the identification of seismic patterns and future projections*          下载免费PDF全文

Hakan Karaca 《地震科学（英文版）》2020,33(2):98-106

The current earthquake forecast algorithms are not free of shortcomings due to inherent limitations. Especially, the requirement of stationarity in the evaluation of earthquake time series as a prerequisite, significantly limits the use of forecast algorithms to areas where stationary data is not available. Another shortcoming of forecast algorithms is the ergodicity assumption, which states that certain characteristics of seismicity are spatially invariant. In this study, a new earthquake forecast approach is introduced for the locations where stationary data are not available. For this purpose, the spatial activity rate density for each spatial unit is evaluated as a parameter of a Markov chain. The temporal pattern is identified by setting the states at certain spatial activity rate densities. By using the transition patterns between the states, 1- and 5-year forecasts were computed. The method is suggested as an alternative and complementary to the existing methods by proposing a solution to the issues of ergodicity and stationarity assumptions at the same time.  相似文献   

利用跨断层形变资料研究天山中段断层现今活动特征     

韩桂红  滕海涛  高歌  李桂荣  张治广 《大地测量与地球动力学》2019,39(1):72-76

利用2001年以来天山中段多个跨断层形变场地的测量资料，从断层运动方向和断层平均速率2个方面分析天山中段3条断层现今活动特征。结果表明，霍玛吐断裂呼图壁段断层的活动性质为正、逆断和左、右旋交替活动；北轮台-辛格尔断裂库尔勒段断层表现为右旋运动特征，活动性质为逆断性；妖魔山F2断裂乌鲁木齐段的断层活动性质以逆断为主。妖魔山F2断裂乌鲁木齐段断层的活动程度最高，霍玛吐断裂呼图壁段最低。霍玛吐断裂、北轮台-辛格尔断裂、妖魔山F2断裂垂直方向上基本均处于张性变化，前两者水平向处于挤压状态；断层活动速率的时间进程具有阶段性特征，各个时间段转折点有较好的匹配性。  相似文献   

南美洲鳗鲡(Anguilla rostrata)的耗氧率(ROC)、窒息点(AP)和适温范围(RT)及对非离子氨(NIA)、NO2-的LC50和SC的研究     

杨小东  江兴龙  乐普敏  龚铭杰 《海洋与湖沼》2019,50(2):455-464

为研究南美洲鳗鲡(Anguillarostrata)的耗氧率及其对水温、低溶氧、非离子氨和亚硝酸盐耐受性,本研究采用自制的鱼类呼吸装置测定其耗氧率和窒息点,以黑仔鳗为试验材料,探索其对水温、非离子氨、亚硝酸盐耐受性。结果表明,南美洲鳗鲡耗氧率存在昼夜变化,其昼间耗氧率为(86.46±37.77)mg/(kgh),夜间耗氧率为(123.58±22.56)mg/(kgh),二者存在显著性差异(P0.05);在15—30°C范围内,耗氧率随温度升高逐渐增大,耗氧率和水温的回归方程y=–0.1316x2+9.4507x–13.712(R2=0.9993);南美洲鳗鲡的耗氧率随体质量增大而降低,耗氧量随体质量增加而增大,耗氧量和体重的回归方程为y=0.2321x0.8334(R2=0.9979);在水温25°C时其窒息点随鱼体质量的增大而降低,均重10g、40g和160g的鳗鲡窒息点溶解氧浓度分别为(0.98±0.25)、(0.46±0.06)和(0.32±0.02)mg/L;13—29°C为南美洲鳗鲡的适温范围,25—29°C为其生长适宜水温,在一定范围内的短时低水温或高水温环境对其损伤是可逆的;水中非离子氨对南美洲鳗鲡的LC50和SC分别为12.22mg/L和1.22mg/L,亚硝酸盐氮对南美洲鳗鲡的LC50和SC分别为61.68mg/L和6.17mg/L。  相似文献   

Interpreting zirconium‐in‐rutile thermometric results          下载免费PDF全文

K. Taylor‐Jones  R. Powell 《Journal of Metamorphic Geology》2015,33(2):115-122

At first sight, experimental results and observations on rocks suggest that the Zr content in rutile, where equilibrated with quartz and zircon, should be a useful thermometer for metamorphic rocks. However, diffusion data for Zr in rutile imply that thermometry should not, for plausible rates of cooling, give the high temperatures commonly observed in high‐grade metamorphic rocks. It is suggested here that such observations can be accounted for by high‐T diffusive closure of Si in rutile, causing the interior of rutile grains to become insensitive to the thermometer equilibrium well above the temperature of Zr diffusive closure. Paired with comparatively slow grain boundary diffusion and problematic zircon nucleation, this allows for cases of Zr retention in rutile through temperatures where Zr is still diffusively mobile within rutile grains. Other observations that may be accounted for in this context are large inter‐grain ranges of rutile Zr contents uncorrelated with rutile grain size, and flat Zr profiles across individual rutile grains, counter to what would be expected from diffusive closure. A consequence is that it is unlikely that Zr‐in‐rutile thermometry will be useful for estimating rock cooling rates.  相似文献   

Numerical simulation of percussive drilling          下载免费PDF全文

Alexandre Depouhon  Vincent Denoël  Emmanuel Detournay 《国际地质力学数值与分析法杂志》2015,39(8):889-912

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Boundary frame contribution in coupled and uncoupled steel plate shear walls          下载免费PDF全文

Meng Wang  Daniel J. Borello  Larry A. Fahnestock 《地震工程与结构动力学》2017,46(14):2355-2380

The steel plate shear wall (SPSW) system is a robust option for earthquake resistance due to the strength, stiffness, ductility and energy dissipation that it provides. Although thin infill plates are efficient for resisting lateral loads, boundary frames that are proportioned based on capacity design requirements add significant structural weight that appears to be one of the factors limiting the use of the system in practice. An alternate configuration, the SPSW with coupling (SPSW‐WC), was explored recently as an option for increasing architectural flexibility while also improving overall system economy and seismic performance. The SPSW‐WC, which extensively employs flexural boundary frame contribution, has shown promise in analytical, numerical and experimental studies, but recent research on uncoupled SPSWs suggests that boundary frame contribution should not be considered for carrying seismic design shear. As a result, in the present study, boundary frame contribution in SPSWs was explored with detailed three‐dimensional finite element models, which were validated against large‐scale SPSW‐WC tests. Six‐story systems were considered, and the study matrix included single and double uncoupled SPSWs along with coupled SPSWs that had various degrees of coupling. Variations in design methodology were also explored. The modeling framework was employed to conduct static monotonic and cyclic pushover analyses and dynamic response history analysis. These analyses demonstrate the beneficial effect of coupling in SPSWs and illustrate the need to consider boundary frame contribution in design of coupled SPSWs. In addition, sharing design shear between the infill plate and the boundary frame is more generally shown to not be detrimental if this sharing is done in the design stage based on elastic analysis and the resulting boundary frame provides adequate secondary strength and stiffness following infill plate yielding. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Potential wind erosion rate response to climate and land‐use changes in the watershed of the Ningxia–Inner Mongolia reach of the Yellow River,China, 1986–2013          下载免费PDF全文

Heqiang Du  Tao Wang  Xian Xue 《地球表面变化过程与地形》2017,42(13):1923-1937

Climate and land‐use changes could strongly affect wind erosion and in turn cause a series of environmental problems. Thus, the objective of this study was to assess potential wind erosion rate (PWER) response to climate and land‐use changes in the watershed of the Ningxia–Inner Mongolia Reach of the Yellow River (NIMRYR), China. The watershed of NIMRYR suffers from serious wind erosion hazards, and over recent decades, wind erosion intensity and distribution has changed, following climate and land‐use changes. To understand these processes in the NIMRYR watershed, the Integrated Wind Erosion Modelling System (IWEMS) and the Revised Wind Erosion Equation (RWEQ) were used to calculate the PWER under different climate conditions and land‐use scenarios, and to assess the influences of climate and land‐use changes on the PWER. The results show the PWER in the whole watershed had a significant declining trend from 1986 to 2013. The results of the relationship among PWER, climate change, and land‐use changes showed that climate change was the dominant control on the PWER change in this watershed. Compared to the period 1986–1995, the average PWER decreased 23.32% and 64.98% as a result of climate change in the periods 1996–2005 and 2006–2013, respectively. In contrast with climate change, the effects of land‐use changes on the average PWER were much lower, and represented a change in PWER of less than 3.3% across the whole watershed. The study method we used could provide some valuable reference for wind erosion modelling, and the research results should help climate and land‐use researchers to develop strategies to reduce wind erosion. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

SPATIAL AND TEMPORAL DISTRIBUTION OF SLIP RATE DEFICIT ACROSS HAIYUAN-LIUPAN SHAN FAULT ZONE CONSTRAINED BY GPS DATA          下载免费PDF全文

HAO Ming  LI Yu-hang  QIN Shan-lan 《地震地质》2017,39(3):471-484

As the northeast boundary of the Tibetan plateau, the Haiyuan-Liupan Shan fault zone has separated the intensely tectonic deformed Tibetan plateau from the stable blocks of Ordos and Alxa since Cenozoic era. It is an active fault with high seismic risk in the west of mainland China. Using geology and geodetic techniques, previous studies have obtained the long-term slip rate across the Haiyuan-Liupan Shan fault zone. However, the detailed locking result and slip rate deficit across this fault zone are scarce. After the 2008 Wenchuan M_S8.0 earthquake, the tectonic stress field of Longmen Shan Fault and its vicinity was changed, which suggests that the crustal movement and potential seismic risk of Haiyuan-Liupan Shan fault zone should be investigated necessarily. Utilizing GPS horizontal velocities observed before and after Wenchuan earthquake(1999~2007 and 2009~2014), the spatial and temporal distributions of locking and slip rate deficit across the Haiyuan-Liupan Shan fault zone are inferred. In our model, we assume that the crustal deformation is caused by block rotation, horizontal strain rate within block and locking on block-bounding faults. The inversion results suggest that the Haiyuan fault zone has a left-lateral strike-slip rate deficit, the northern section of Liupan Shan has a thrust dip-slip rate deficit, while the southern section has a normal dip-slip rate deficit. The locking depths of Maomao Shan and west section of Laohu Shan are 25km during two periods, and the maximum left-lateral slip rate deficit is 6mm/a. The locking depths of east section of Laohu Shan and Haiyuan segment are shallow, and creep slip dominates them presently, which indicates that these sections are in the postseismic relaxation process of the 1920 Haiyuan earthquake. The Liupan Shan Fault has a locking depth of 35km with a maximum dip-slip rate deficit of 2mm/a. After the Wenchuan earthquake, the high slip rate deficit across Liupan Shan Fault migrated from its middle to northern section, and the range decreased, while its southern section had a normal-slip rate deficit. Our results show that the Maomao Shan Fault and west section of Laohu Shan Fault could accumulate strain rapidly and these sections are within the Tianzhu seismic gap. Although the Liupan Shan Fault accumulates strain slowly, a long time has been passed since last large earthquake, and it has accumulated high strain energy possibly. Therefore, the potential seismic risks of these segments are significantly high compared to other segments along the Haiyuan-Liupan Shan fault zone.  相似文献